Object Details
- Pike, Jr., Benjamin
- Description
- This brass circular protractor was manufactured in the mid-19th century and made available for sale by the New York City firm headed by Benjamin Pike (1777–1863). Pike, a dealer of optical, mathematical, and philosophical instruments whose firm serviced the entire United States, partnered at various times with his sons, Benjamin Jr., Daniel, and Gardner. The business was called “Benjamin Pike & Son,” as is marked on the vernier limb of this protractor, between 1831 and 1841 and between 1843 and 1850.
- This protractor likely would have been of interest to surveyors and engineers. The object is divided by single degrees. It bears two sets of markings by tens in the clockwise direction: from 0° to 90° to 0° to 90° to 0°, and from 10° to 360°. Brass arms extend into the center to divide the protractor into quadrants. The arms are not placed at the 0° and 90° points, as one might expect, but rather at the 50/50, 40/140, 50/230, and 40/320 markings. There are rounded, beveled notches at the 90/90 and 90/270 markings. A round hole (5/8" diameter) is at the center. Crosshairs would typically have been placed in this hole to mark the origin point for measuring angles, but no crosshairs are present. Instead, a brass piece fills about one-third of the hole.
- An arm pivoted from the center carries a vernier, which allows the user to read off angles to 10 minutes of arc. The vernier is marked by 30s from 60 to 0 to 60. The vernier arm is marked: Benj-n Pike & Son New York. The arm extends beyond the vernier. A brass strip, fastened on top of the arm, contains a sharp metal pin that pokes through a hole near the end of the arm. The pin was used to prick, or mark, angle points.
- This protractor has some notable differences from the circular protractor depicted in Pike catalogs of 1848 and 1856: its outer edge is smooth instead of appearing to bear gear teeth; it has one vernier arm instead of two; and it has two sets of markings instead of one.
- References: Deborah J. Warner, “Browse by Maker: Pike,” National Museum of American History Physical Sciences Collection: Surveying and Geodesy, http://americanhistory.si.edu/collections/surveying/maker.cfm?makerid=22; Benjamin Pike Jr., Pike’s Illustrated Descriptive Catalogue of Optical, Mathematical, and Philosophical Instruments (New York, 1848), 43–45; Benjamin Pike Jr., Pike’s Illustrated Descriptive Catalogue of Optical, Mathematical, and Philosophical Instruments (New York, 1856), 43–45; facsimile with historical introduction by Deborah J. Warner (Dracut, Mass., and San Francisco, 1984).
- Location
- Currently not on view
- Credit Line
- Gift of John William Christopher Draper and James Christopher Draper
- 1831-1850
- ID Number
- MA.304826.059
- accession number
- 304826
- catalog number
- 304826.059
- Object Name
- protractor
- Physical Description
- brass (overall material)
- Measurements
- overall: .7 cm x 16.3 cm x 23.8 cm; 9/32 in x 6 13/32 in x 9 3/8 in
- place made
- United States: New York, New York City
- See more items in
- Medicine and Science: Mathematics
- Science & Mathematics
- Protractors
- National Museum of American History
- Subject
- Mathematics
- Protractor
- Surveying
- Engineering
- Record ID
- nmah_904302
- GUID (Link to Original Record)
- https://n2t.net/ark:/65665/ng49ca746a7-5e2c-704b-e053-15f76fa0b4fa
